Complete list of maintenance methods for

How much do you know about the daily maintenance methods of work clothes? The correct maintenance method can not only maintain the performance of the work clothes, but also extend the service life of the work clothes. Next, let's take a look at the methods and precautions for maintaining work clothes.

Daily maintenance skills of work clothes

1. Remove the items in the pocket, change the customized work clothes after going home, and take out the items in the pocket. If the pocket is filled with things and hung, the customized work clothes are easy to deform.

2. The overalls cannot be machine washed. They are easy to deform after machine washing. Hand washing is better.

3. The inner side of the collar of the work clothes is easy to accumulate dust, so the collar should be erected and hung with a hanger, and the dust should be stored after being cleared.

4. It is recommended not to wear a customized work coat for more than two days continuously. Because of the deformation caused by local tension, a suit hanger should be selected and hung up so that it can be properly "rested" for recovery.

5. If the work clothes are stained with other fibers or dust that is difficult to remove, it can be absorbed with adhesive tape.

6. Customized overalls worn or kept in the wardrobe for a long time are hung in a slightly humid place, which is conducive to the recovery of fatigue of Yiyan fiber and can remove wrinkles. However, excessive humidity will affect the shaping effect.

7. When storing overalls, hang them on the hanger smoothly, with the reverse side facing outward, put mothballs and other insecticides in the pocket, cover them with plastic cavity sleeves, and store them in a place with good ventilation and low humidity.

8. The coat of work clothes shall be hung with a coat hanger, and a wooden or plastic wide handle arc shaped coat hanger shall be used.

Prevent fading of customized work clothes

1. How to prevent customized work clothes from fading when washing? It is recommended to put an appropriate amount of salt in the water first, and then how to prevent the color fading of customized work clothes? Immerse in water for 30 minutes. After that, wash with clean water and follow the conventional hand washing method.

2. Generally, knits are easy to fade, so before washing, soak them for about 10 minutes, and then wash them according to the conventional washing method. Such washing method can not only prevent fading, but also extend the wearing time of the clothes.

3. It is common that colored clothes will affect their beauty due to improper washing methods, so many colored clothes must be washed separately to avoid dyeing.

4. It is recommended to wash the newly bought pure cotton clothes with boiling water before wearing them, which can wear well and not fade easily.

5. If the work clothes are customized by the company, the quality is not very good, so the fading phenomenon often occurs during cleaning. So before washing, soak the clothes in cold salt water for 1-2 hours, and then wash them with soap.

Cleaning method for stains on work clothes

The work clothes will inevitably be stained when they are worn. If they cannot be properly cleaned, they may become permanent stains that can never be cleaned out. How to clean the stains in a short time? In order to have a better image and maintain the company's corporate image, we need to clean the work clothes in time. We need to use different methods to deal with different stains. How to solve various stains?

When cleaning stains on work clothes, washing products such as washing powder and liquid detergent are not omnipotent. Although these washing products can remove surface stains and dust, many stains cannot be removed, and there is a better way to remove stains. Let's learn together.

1. Rust

If you find rust stains on your work clothes, don't be too nervous, but you need time to deal with them. First of all, you need to immerse the work clothes in water containing 2% acetic acid. After soaking for two or three minutes, you can wash them with water. If the stains are relatively small, you can also use a cotton stick to dip in a little acetic acid. The acetic acid content should be basically thicker than that of water washing, and it should contain 5%. Apply it once and again in the place with stains. After several times, the rust stains will disappear.

2. Universal glue

When the work clothes are stained with the all-purpose glue, you can use banana water to drop on the glue stains, and use a brush to brush repeatedly. Pay attention to the gentle action of brushing. When the glue stains become soft and fall off from the work clothes, you can clean them with clean water, and then brush them repeatedly for several times. However, some work clothes containing fiber cannot use this method, Because if it is not brushed properly, it may damage the surface fiber of the work clothes.

3. Removal of watercolor stains

When the work clothes are stained with watercolor stains, first of all, use hot water to dissolve and remove the glue in the stains. The heat of the hot water should be between 80-60 degrees. Too hot will make the color fall on the work clothes more difficult to clean. Too cold will not work. After soaking in hot water, use soap to make foam. After repeated cleaning, watercolor stains will fall.

Cleaning and maintenance methods for work clothes

According to common sense, uniforms with bright colors cannot be directly exposed to the sun, and work clothes with different colors are also suitable for such drying method, so as to keep the clothes from losing color and keep the clothes fresh. General work clothes are made of pure cotton or cotton and hemp fabrics. I have seen many employees directly dry their work clothes in the sun after cleaning them. This method is desirable. The fiber here will hardly deform or drop slightly in the general sunlight, but it will not deform. However, when drying, pay attention to turning the inside of the work clothes to the outside, This will better protect it from fading. Now let's take a look at the cleaning and maintenance methods of all kinds of work clothes with different textures.

1. Cotton work clothes

Cotton work clothes have strong alkali resistance, acid resistance and high temperature resistance, and can be washed with various soaps or detergents. Before washing, it can be soaked in water for a few minutes, but it should not be too long to avoid color damage. The underwear should not be soaked in hot water to prevent the protein in the sweat stains from solidifying and adhering to the clothes, and yellow sweat spots will appear.

When washing with detergent, the water temperature is 40-50 ℃. When rinsing, you can master the method of "a small amount of water for many times", that is, you may not use a lot of water every time you rinse with clean water; But wash it more often. After each rinse, it shall be screwed dry and then rinsed for a second time to improve the washing efficiency. After washing, the work clothes shall be dried in a ventilated and open place to avoid exposure to the sun and fading of the work clothes.

2. Linen fabric work clothes

The hemp fiber work clothes are rigid and have poor cohesion. When washing, they should be lighter than cotton work clothes. Do not use a hard brush or rub them hard to prevent the cloth from fuzzing. After washing, it is not allowed to twist the clothes forcibly, do not soak the work clothes in hot water, and do not expose them to the sun to avoid fading.

3. Silk work clothes

Before washing, soak the work clothes in water for about 10 minutes, and the soaking time should not be too long. Avoid washing with alkaline water, and use neutral soap or soap tablets or neutral detergent. Bathing liquid should be at low temperature or room temperature. After washing, gently squeeze the water and avoid twisting. After washing, the work clothes should be dried in a cool and ventilated place. It should not be exposed to the sun, let alone dried.

4. Wool work clothes

Wool is not resistant to alkali, so neutral detergent or soap sheet should be used to wash the work clothes. Wool fabric will shrink and deform in water solution above 30 ℃, so the temperature of washing bath should not exceed 40 ℃. Generally, room temperature (25 ℃) water is used to prepare detergent aqueous solution. When washing, it is forbidden to use washboard to wash, that is, use washing machine to wash, it should be washed gently, and the washing time should not be too long, to prevent condensation.

Do not wring after washing, squeeze with your hands to remove water, and then drain. The washing machine should be used for dehydration for half a minute. It should be dried in a cool and ventilated place, not in strong sunlight, to prevent the fabric from losing its luster and elasticity and causing a decline in strength.

If you can pay a little attention to these nursing common sense when you wear and wash at ordinary times, and can do so, I believe your work clothes will be more durable and as new as ever. After knowing the above methods, I will no longer be afraid of the stains on my work clothes and can't clean them.